November Safety Topic: Reduced Daylight & Visibility Safety
As November arrives, daylight hours become shorter, and many employees may begin or end their shifts in darkness or low-light conditions. Reduced visibility increases the risk of vehicle accidents, struck-by incidents, slips, trips, and falls.
The goal is simple: Make sure you can see hazards, and make sure others can see you.
1. Wear High-Visibility Clothing
-
Wear reflective vests or high-visibility clothing when working near vehicles or equipment.
-
Make sure reflective strips are clean and not damaged.
-
Wear the appropriate visibility gear for your work environment.
-
Do not cover reflective material with jackets, backpacks, or other clothing.
Safety reminder: If drivers and equipment operators cannot see you, they cannot avoid you.
2. Use Proper Lighting
-
Make sure work areas have adequate lighting.
-
Use flashlights or headlamps when necessary.
-
Check that outdoor lights are working properly.
-
Report burned-out lights or dark areas.
-
Avoid creating glare that can temporarily blind other workers.
Safety reminder: Never assume you can see a hazard just because you know the area.
3. Watch Out for Moving Equipment and Vehicles
-
Stay clear of forklifts, trucks, and heavy equipment.
-
Never walk behind backing vehicles.
-
Make eye contact with equipment operators before approaching.
-
Use designated pedestrian walkways.
-
Never assume an operator sees you.
Safety reminder: Stay out of blind spots and never walk under suspended loads.
4. Be Careful Walking in Dark or Poorly Lit Areas
-
Watch for uneven ground, potholes, and obstacles.
-
Pay attention to wet floors and slippery surfaces.
-
Use handrails when walking up or down stairs.
-
Keep walkways clear of materials and debris.
-
Use a flashlight when necessary.
Safety reminder: Slow down and watch where you step.
5. Driving Safety During Early Mornings and Evenings
-
Turn headlights on when visibility is reduced.
-
Keep windshields, mirrors, and headlights clean.
-
Reduce speed when visibility is poor.
-
Increase following distance.
-
Watch for pedestrians, workers, and animals near roadways.
-
Never drive distracted or fatigued.
Safety reminder: Drive for the conditions, not just the speed limit.
Toolbox Talk: Questions for Employees
Use these questions during your November safety meeting:
-
Are all reflective vests and high-visibility clothing in good condition?
-
Are there any poorly lit areas around our workplace?
-
Can equipment operators clearly see pedestrians?
-
Are employees using flashlights or other lighting when needed?
-
What can we do to improve visibility and prevent accidents?
Important Takeaway
BE SEEN. STAY ALERT. STAY SAFE.
As daylight decreases, the risks increase. Take the extra time to wear proper visibility gear, check your surroundings, and make sure your coworkers can see you.
Closing safety message: Don’t let darkness catch you off guard. A few extra seconds to improve visibility can prevent a serious injury or save a life.

